• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces are ready to use right out of the box. They're ideal for adding ambiance without requiring venting or reworking.

They are usually heavy and require careful installation. Follow these steps to hang your new electric fireplace in the correct way.

1. Connect the Brackets

A wall-mounted electric fireplace or recessed electric fire instantly transforms any space. This is a great solution for those who don't have a fireplace or live in apartments.

First, you must decide where to put your new electric fire. You should choose a place that isn't prone to moisture and at a minimum, just a few feet from furniture and drapes. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.

Use a drill or other tool to make exploratory holes in the wall. Check for studs using a stud-detector. Mark the drywall according to the location of the fireplace mounting brackets. Next, patch and paint the drywall or build out the wall to prepare it for the fireplace installation.

Depending on the wall-mounted fire, Electric Fireplace Wall Hanging you may be required to install the screen and firebox as one unit or separate them with the use of a wall hung electric fires bracket. If you're not sure about your capability to complete this task employ a general contractor or a skilled carpenter.

Most electric fireplace with wall mount fireplaces include a template for the installation process, but you should also have a spirit level and pencil handy to help you precisely mark the location in which you'll mount the wall hung electric fires brackets. Before drilling, make use of the template to verify that the fireplace's power cable is able to reach from the installation site to an outlet nearby to plug it in.

Install the drywall as clean and flush as you can to give the fireplace a sleek appearance. Add a piece of trim to the bottom edge and then paint and sand the entire frame to give it a finished look.

Most wall-mounted electric fireplaces have hooks or slots on the back of the unit, which you insert into slots or hooks on the mounting brackets. Make sure you align the slots or hooks before connecting the fire brackets. Once the fire is set, you can add additional elements like driftwood logs, crystal embers, or decorative rocks.

2. Check the Bottom Bracket

The space above the mantel, fireplace, or chimney breast is a great spot for hanging artwork. There is a fine balance between an artistic arrangement and one that doesn't detract from the overall style of the fireplace.

A general rule is that a photo should not exceed 80percent of the length of the fireplace or mantel it's placed on. This will keep it proportionate and will make it look nice on the wall. This guideline could be influenced by other ornaments and decorative items on the mantel.

If you're planning to put an image above your fireplace, it's crucial that the frame is made from glass or another material that is able to withstand high temperatures. If you're unsure about the frame, you can test it frame using a heat-sensitive cloth to see whether it's suitable for this type of installation.

A common concern with hanging pictures above the fireplace is the possibility of damage to the artwork from smoke or other heat sources. This is not a problem with a wood- or gas-powered fireplace. However when you are planning to use an electric wall fire, it's important to check the instructions provided by the manufacturer.

Most electrical fires have mounting brackets that can be attached to the wall by hanging screws or wall-mounted fixing systems. It is recommended that you drill exploratory hole in a discrete area of the wall prior to mounting your electric fire. You can then make use of a cable and pipe locater to ensure that there aren't any pipes or cables close to the location where you want to mount your fire.

If you do, you can either mount your fire over the electrical socket or move it to a different location. If you choose to move it to a different location you'll need to make sure that the power cable be able to connect from the fire to the electrical socket - this is particularly important for Electric Fireplace Wall Hanging older homes or houses with solid walls. If you don't do this, your electric fireplace will not function effectively. Some models include an outline of the locations to drill holes, while others require an apex level and pencil to mark the location on your wall.

3. Connect the Power Cord

If you've installed a recessed electric fireplace, you might need to move the plug socket from the wall to behind the unit. This will give you a more elegant appearance. Make sure to test the fireplace prior to doing this to ensure that everything works just as it should.

The third way to mount an electrical fireplace is by framing the room and then building it into the wall. This gives a finished, traditional look and allows you to add mantels. The owner's manual for your particular model will provide information about framing, securing the fireplace, and wiring.

When you're ready to install your new electric fireplace on the wall begin by marking the location of installation using a marker or pencil. Make use of a carpenter's level make sure that the installation area is flat and level. You can use a studfinder to mark the location to know you are drilling in a safe area.

After you've marked the installation location and marked the location, use your drill to make holes for the hanging screws or bracket screws. Make sure to follow the precise directions in the owner's guideline for this step, particularly if you're installing the fireplace in drywall. If you're not sure how to do this you can always ask a professional to do the installation for you.

You can also conceal power cords away from view using an organizer kit for cables. These kits typically come with sleeves, clips, or boxes that can be used to bundle cables. You can also use wire snake tools to help guide the cords along the wall. If you don't want to cut into the drywall, a Powerbridge kit will provide a cleaner and more secure connection.

You can also disguise cords using paintable wire covers, or by attaching them to the wall. Be sure to keep the cover or tacks from the heat source, however. This will shield the cord from damage and prevent accidental contact.

4. Connect the Adapter

A wall-mounted electric fireplace is an excellent option to make for home improvements or those who do not have the space or funds to build gas fireplaces. They are simple to hang and can be used right out of the box. They can be a great alternative for those who are looking for a stylish modern wall hung electric fires accent or the warmth that the fire can bring. They can be hung on any wall as art, and they are electric and have fan-powered heating.

It's a good idea to create a list of all the tools and equipment you'll require prior to starting the installation process. Check the user manual for specific information on how to mount your electric fire. Certain models require brackets to be screwed directly into the wall while others could have a mounting plat that slides into slots or hooks onto the brackets. It is essential to remove all combustible material from the area where you'll be installing a fireplace that is recessed. As a rule of thumb, these materials should be kept 3 feet from the front of the fireplace and 1.5 feet from its sides.

After you've inspected all the parts, you should plug in your electric fireplace and ensure that it works properly. This is an essential step since it will ensure that the flame effect screen and heater operate as intended. This will give you a good idea of the final product in its final state.

Cover the cord after you are satisfied that it's working correctly. This will keep the final product neat. This can be achieved by installing a new outlet with the cord that is tucked behind the unit. This will give your fireplace a seamless look.