• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Lock Replacement - What Are the Different Parts of a Door Lock?

Door locks that aren't working properly can make your home a to target for burglars. The change of your lock is an inexpensive method to improve security without making your doors inaccessible.

Many locks come with a cardboard template you can wrap around your door edge to ensure it fits properly. This will aid you in avoiding buying the wrong lock.

The Cylinder

The cylinder, also known as the body of the lock, is the primary component of a traditional mechanical door lock. It is made up of a set of spring-loaded pins that hold the door shut in the event that no key is inserted in the hole. When the key is placed in the hole the knob's uneven edge the knob pulls the pins inside the cylinder into their correct place. When the pins fit they allow the bolt, also referred to as the latch to move forward, and then engage the inside of your door.

The bolt extends from the cylinder and into the door frame called the box. The box is designed in a way that the bolt isn't able to be pulled out easily. A clip spring keeps the bolt retracting when the door is closed. When you turn the handle, a spindle is engineered to rotate inside the cylinder. When it's done rotating the slanted portion of the bolt is retracted into the door frame. The bolt rests on the carved-out portion of your doorframe, keeping the door closed until you need to open it once more.

A faceplate is an internal metal plate that is attached to your door on either side of the hole that is used for the deadbolt. Its function is to shield your locking mechanism from damage that could be caused by the repeated insertion and removing of your knob. If you're installing an entirely new lock, ensure that the faceplate aligns with the hole in the door frame and is securely attached to the plate as well as the latch bore.

If you're replacing the door lock ensure that the deadbolt is fitted correctly by sliding it into the strike plate's opening hole. When you're finished you can screw the strike plate and core of your new lock into place. Be careful not to tighten too much, as this can cause damage to the latch and stop it from securing in its groove correctly. It is a good idea to test your new lock by turning the key while it's locked. If you find any issues like a loud deadbolt or an unfastened latch It's best to replace the old lock with a brand new one.

The Faceplate

A faceplate is a large flat plate that is attached to the headstock of a lathe to hold the workpiece. It has several screw holes that are drilled through it, where the screw thread enters through the back and then into the wood. A faceplate can support various shapes but in general they need to be placed properly, balanced and fixed that aren't simple tasks compared to simplicity of an Chuck.

A typical faceplate comes with mounting holes. In this case, three are positioned at 120 degrees to receive the mounting screws 18 in FIGURE. 2. These screw holes are machined through an interchangeable insert 16 or directly into the faceplate's body. A portion between the faceplate has a stepped area that serves as an index mark to identify a specific place on the workpiece blank.

The stepping area has also been designed to be resistant to abrasion so that the fastener won't cause damage to the chisel used to cut it. The surface of the body of the faceplate is different properties from that of the surrounding area and machining into this region warns the operator of a possible contact with a fastener and gives the turner enough time to react.

Screws used to fix a faceplate should have a small amount of free space in the screw hole. There should be no space left behind the screw after it is tightened on the glue block, as this may allow the block to move when turning. A larger-gauge screw will also seat more securely in the faceplate. The screw should go through the middle of the screwhole to prevent the possibility that the screwhead could be in contact with the workpiece.

The Strike Plate

The strike plate is among the most important parts of your door lock. The strike plate is what stops the bolt from sliding when you close the front door. The strike plate also helps to reinforce the double glazing window lock repair and stops intruders breaking in using force against the latch and jamb.

A strike plate is a heavy metal plate that is inserted into the doorjamb (the vertical part of the frame) with a hole that allows the deadbolt or latch to pass through. When the cylinder turns and the bolt is pushed through the strike plate into the doorjamb, securing it shut.

There are a variety of strike plates based on the requirements of your. If you require strike plates that work to your particular lock it will be listed with the product information. Most strike plates are the same and can be used with standard latches as well as locks.

Most strike plates come with an ovular screw hole and a "C-shaped" piece that acts as washer. They are often used on doors with corner rounded edges. They come in different sizes to match the door.

You can increase security by installing strike plates with no lip, which is designed for deadbolts. This is a good option for areas that must be secured quickly, for instance staircases. This is a great option for those who want to secure items or documents inside your home.

Another method to increase the security of your door is to install a box strike plate, which adds strength and thickness to the strike plate. This makes it more difficult to break in through the latch or deadbolt and is often required for commercial doors equipped with security double glazing window locks repairs.

Spray a lock lubricant onto the strike plate in case it isn't aligned to the latch bolt. If this doesn't work you'll have to adjust the strike plate by drilling new screw holes and enlarging the hole for the catch. It is not recommended to make many changes to the strike plate. Repeated and drastic adjustments could cause it to become ineffective.

The Deadbolt

A deadbolt is an iron bolt that binds the door to the doorjamb frame. Unlike a spring-latch used in doorknobs, which can be loided (jimmied) using credit cards or professional tools like latch slips, a deadbolt is locked using a key, thumb turn or electronically (in the case of keyless and smart deadbolts). They offer better protection against forced entry methods like kick-ins, and they are simple to use with minimal maintenance.

The bolt is inserted into a hole or socket inside the doorjamb that is strengthened by a strike plate to provide extra security. The bolt must be at least 1 inch long to make it more difficult to wrench off the door. It is also recommended to select a deadbolt that has an ANSI rating, which shows how secure the lock is.

The strike plate also helps to hold the cylinder in place. There should be three holes along the bolt: one, in the center, connects the facepiece and the cylinder; the other two are to the left and right of the central hole. These are the holes where screws connect the cylinder to the bolt. The screws should come standard with the new deadbolt. Some repair window Locks upvc have decorative covers which are attached to the facepieces. Check the instructions of the manufacturer to ensure that the covers are properly installed.

Choosing the right lock for your home is contemplating your lifestyle and the level of security you require. Single cylinder deadbolts, which are the most popular type of lock, are found on many exterior doors. Keyless deadbolts are more secure, but may be more difficult to operate. Smart deadbolts let you lock and unlock them with voice commands, or through an application on mobile devices.

A professional locksmith can assist you to determine what type of lock is suitable for your home, then install or replace it. Upgrading your front-door locking system is a low-cost option to boost the security of your home. Consider adding a double glazed window lock repairs-cylinder or reversible deadbolt to the side of your front door for an additional layer of security.