• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

window repairs Sash Repairs

Window sashes need to be checked regularly for mold, mildew and damage. You can save future repair costs by catching the issues early before they become out of control.

The sash is an interior frame that is vertically moved upwards or downwards in windows that open. This article will demonstrate how to carry out a few simple repairs to the sash.

Weather Stripping

Wooden window sashes can give an elegant appearance to your home. They are also durable and last for a long time provided they are properly maintained. They can, however, become damaged or degraded with time, due to exposure and normal wear and tear. Sash repair experts can restore windows to their original condition and maintain their beauty longer than replacement windows.

The first step for sash window repairs is addressing weather stripping. It's found on both the sash as well as the frame. It could cause drafts if worn out or loose. To fix it, begin by determining the brand of your window and the date on which the glass was manufactured (etched in the corner of the glass or on the aluminum spacer between panes). Remove the sash and mark its width and height so that you can get new weather stripping that is compatible with the original.

Then, remove the sash from its holder and place it on flat surfaces to allow you to access all four sides. If the sash is double-hung, you'll have to remove the weights and their ropes, which should have fallen into the pocket of the jamb liner. After removing the sash using the utility knife, remove the old weather stripping by hand or with a putty blade.

Once the sash has been cleaned, you can replace parting stops. These are long pieces that divide the sashes. Pam likes to replace these with standard 1/2-inch-by - 3/4-inch window trim from the lumberyard, but you could also use scrap wood.

After removing the parting stops and trimming them to your desired length, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound using your putty tool, and let it dry for at least a day. After the putty has completely cured and dried, you can apply an acrylic latex topcoat. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes is susceptible to wear and tear due to age and use and the result could be a window or door that won't open or close easily. It's important to know that replacing or fixing this hardware is usually straightforward and cost-effective. If a sash becomes difficult to operate, try spraying some grease into the jamb channel, and then open it to see if that fixes the problem. If not, the problem is likely with the sash balance, and you'll need to remove the sash to gain access to this hardware.

The ideal situation is for window sashes to swing open and closed with minimal effort but this is a difficult task when the weights are worn or if the sash meeting rail isn't properly coated. This issue could be caused by a number of reasons, such as lack of maintenance or by a mismatched weight rating for the particular window sash.

If the hinge arms of a window are starting to slide, this could cause the sash's to drag and eventually strike the frame in the corner that's directly opposite the hinge arm (Photo 1). To address this issue, first make sure the sash is squarely inserted into the frame's opening and then remove it from the window repair. If the sash was fixed to the hinge arm, remove the hinge and replace it. (Photo 2). Then, you can install the new sash (Photo 3).

Old windows, especially those in older homes, can be difficult to open and close due to hinges that are sagging and an overall inefficiency. In many cases it is a matter of making a few minor adjustments that can allow these windows to operate smoothly and help homeowners save money on energy costs.

It is crucial to have the tools you need before you begin. Mark the location of the hinge channel on the frame (Photo 1) using pencil. This will allow you to get the channel back into the correct position after you've finished. Remove the sash and then remove all hardware, including the parting beads, cords, and chains that help to hold the sash. Soften any hardened putty with the help of a heat gun set at medium and equipped with an shield to block the nozzle. Take off the old sash and place it in a bag with a label.

Sash Weights

If your window sash repairs are to replace a broken cord or simply to keep the windows functional, replacing worn out weights on sash can improve sash operation and help reduce energy costs. Sash weights are heavy lead or iron cylinders that are enclosed in a concealed cavity and connected to the movable the sash with a rope. These weights function as counterbalances, which allows you to open and shut the window repairs near me without requiring mechanical or electrical devices. When they fail, sashweights tend to be ignored or disabled by homeowners.

A weight from a sash that fell out of the cavity is difficult to recover It is therefore important to find a replacement that fits properly. You will also require a new piece of string, a length sashcord and some sashpulleys to tie the weights you are replacing to the cord.

Older windows made of wood are joined by mortise and tenon joints. Pin punch and hammer can be used to remove the wood pegs holding the parts together. The majority of them are large on one side, but smaller on the other. It is essential to first remove the smaller diameter sides. Sashes that were made later in the century made use of glue instead of pegs. They can be separated by cutting the glue line using a knife, then tapping the mortised part loose with mallets.

Once the sash is freed then you can take out the sash stop and access the weight pocket. Usually it is done by drilling an opening in the bottom of each jamb. The hole is surrounded by a wooden panel that can be removed to reveal the inner workings.

After you have the sash stopped and the access panel removed, you'll be able to remove the old sash weight and replace it with the new. First, weigh the sash to ensure that the weights you have may not be the right size. After the new weight is in place, tie a string to it and then thread it through the pulley for the sash. Then, you can attach the string to the boxed frame. Leave a few inches of space at the top of the string to allow future adjustments.

Sash Cords

Most double glazed window repairs-hung windows of the past have a cord or chain attached to the weights which supports and keeps the sashes in balance within the jamb. Over time, these chains may become damaged and make it difficult to raise windows. A new sash cord can restore the ability to move the sash up and down and will keep it in its place when it is opened.

The first step to replace sash cords is to locate and take out the access panels located in the jambs. They are usually screwed or nailed into and require removal. You might be able to use a hammer or chisel for removing them however, it is always best to lay down dust sheets before beginning any work.

After you have removed the access panel, you can begin working on the sash. Make the small parting beads (also known as "tie rails") out of their grooves with the chisel or flat bar. It is important to take your time, as these are often placed in a wedge or nail. If the sash is still in place, remove the mortise and the tenon joints by using a hammer and pin punch or screwdriver, then unhook the wood pegs on each piece. You should now be able to move the sash around without difficulty, though it might require oil if it feels stiff.

With the sash open, measure enough sash cord/chain to extend from the pulley in the top of the jamb to the sash slot at the bottom. Cut the chain or cord and attach it as described in Step 6 above. You can either use a hammer and screws or nails, however nails are less likely to cause damage.

It is recommended to keep the original weights in place unless you have purchased a kit to replace the counterbalance that was previously installed. It's not expensive to buy these from salvage shops for architectural purposes and they'll be simple to install once you've got the sash unlocked. Based on the dimensions and shape of your window, you might need to install one or two sashweights to keep it open.