• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles that you have in your home are an essential element of your decor. A new handle will elevate your home's decor and bring your decor to the present.

Over time, your doors' knobs can start to feel stiff, or break. These are indications that it's time to replace the knobs. This guide will help you choose the appropriate replacement door handle for your home.

Door Knobs

The handles on your doors will enhance the appearance of your home and make it easier to shut and open them. They come in a variety of finishes, colors, and styles to complement your decor. If yours is beginning show signs of wear or just need an upgrade replacing them is easy and can be accomplished in just a few steps.

The first thing you need to find is the shaft or spindle through which the knob is attached to the door. Some knobs have a tiny opening that can be used with a screwdriver for removal of the set screws that keep the handle in place. Some have a small slot or hole that allows you to press a spring-activated detent pin with flathead. This pin lets go of the latch mechanism and lets you pull or push the knob.

Once you have the spindle or shaft in your hands take the knob off and replace it. Align it correctly and check that the latch is working properly before tightening new set screws.

After replacing the knob, place the rod for the latch into the door's hole. Interlock it with the rod system on the second knob. Make sure the holes are aligned then tighten the screws on the latch plate.

Some people opt for a smooth or brushed metal finish on their Door handle repairs near me hardware for an elegant, modern look that matches other furnishings in their homes. Some prefer a rustic look that goes well with farmhouse-styled rooms. If you have someone in your family with mobility issues, you may prefer the lever or rim lock that requires less pressure to operate.

Other factors are being considered more and more for the design of door handles. Accessibility and control of infections are key issues that have led to the development of new and innovative designs for handles like those that can be operated with the forearm of a person.

Latch

The latch that holds the door handle open will wear down over time. It is simple to change the latch on your door handle repair plate handle. This will make huge differences in how it opens and closes.

Depending on the type of handle you have the latch could be part of the knob or it could be an independent piece that is attached to the door itself. In either case, you will follow the same steps to remove and replace. It's easy to remove the old latch, especially when you have doors with a "magic" button. The tiny pressure-slot, which is located on the side knob, is what you have to press to pull the latch out of the handle.

If your handle doesn't have this magic button you will need to remove the cover plates that are placed over the latch plate. These are usually rectangular or circular and can be removed using a screwdriver to pull them off of the handle. Some have a slot where you can insert your screwdriver, whereas others just snap off.

The next step is to loosen the two machine screws holding the latch and the plate to the door handle repair plate handle. These are the shorter screws with a sharp tip and you'll have to store them in a safe location to reuse them in later steps. After the screws have been removed, you are able to remove the latch plate as well as the mechanism from the hole and put it aside.

You can now begin working on the new latch. Install the inside plate of the latch into the hole in the door and secure it using the hardware provided. Make sure that the square pin on the inside of the latch is pointing towards the latching mechanism inside the handle and that it is lined up with the other screw chambers in the door handle. Then push the exterior latch plate onto and secure it using the screws provided.

Strike Plate

One of the most frequent reasons for replacing a upvc door handle repair handle is because it feels loose or doesn't lock properly. This is often due to incorrectly aligned parts in the latching mechanism, like an unbalanced strike plate that is too small or shifted upwards or downwards on the doorjamb over time. This project allows you to replace your old strikeplate with a more substantial one, which will offer more security for your door and ensure it stays closed.

To check if the problem is caused by the strike plate, apply lipstick or similar marking material to the latch bolt. Close the door and attempt to latch it. If the mark is below the strike plate hole it means that the plate is too small and the door will not latch. If the mark is above or below the strikeplate hole the strikeplate has likely been moved up or downward on the doorjamb.

It is possible to put the new strikeplate in place over the existing one using the screws included with it, based on the door. You may have to first drill holes and then chisel the wood to ensure a secure fit. If this is the case, be cautious not to chisel too deeply or you could damage the integrity of your doorjamb.

Installing a new box-style strike plate will provide the lock with a stronger grip on doors and will require more force to open the doors. Typically it will require two longer screws that secure the strike plate to the frame of the door. It is necessary to remove the old strike plate and then drill and chisel the wood to create space for the new one.

This hard-to find strike plate is made from solid brass and has an extremely thick. It's made to be used on antique rim locks. It comes with machine screws and wood screws, ensuring that you have the correct hardware for the job. Be aware that wood screws have a pointy edge, whereas the machine ones are more blunt.